First, use 1. The price of rakes should be placed or fixed on a solid, level foundation, and should be stable during operation. There can be no major shocks. 2. Before starting the machine, it is necessary to conduct a comprehensive inspection of the various parts of the machine. Pull the price of the stalk cutter by hand, and see if the rotation is flexible, whether there is a crack in the cutter plate, whether the fasteners are loose, and it is found that hidden troubles should be promptly eliminated. 3. Before the operation, let the price of the slasher idle for a while, observe whether the operation is stable, whether there is abnormal noise, and confirm that the operation is normal and then put into operation. 4, feed should be uniform, if the feed shaft too much lead to reduce the speed of the knife shaft, it should stop cleaning. 5, before processing feed, should remove the impurities in the material, prevent iron, stones and other hard materials feeding. 6. If grass jamming occurs during operation, immediately disengage the clutch and stop it to remove the fault. Do not open the protective cover while the machine is running. 7. Stop the feeding before the end of the job. Wait until all the materials in the standby device are discharged before separating the clutch and cutting off the power. Clean up the debris in the machine. Second, maintenance and maintenance 1. Always check the fasteners for looseness and tighten them. 2. Strengthen the maintenance of bearing seats, couplings, and transmission boxes, and regularly add or replace lubricating oil and grease. 3. The price of rakes with adjustable cutting gaps should be properly adjusted according to the thickness of crop stalks to ensure that the price of rakes is normal. 4. When the blunt edge of the blade is found, apply the oilstone to sharpen the blade. 5. After the class is finished, the dust and dirt on the machine should be promptly removed. After the end of each season, the debris in the machine should be removed. Anti-rust oil should be applied to the working parts and placed in a ventilated and dry place indoors. Rose Flower,Jasmine Flower,Wild Chrysanthemum,Common Bombax Flower Henan Qiancuntang medicial technology co.ltd. , https://www.qctchineseherb.com