First, the impact of high temperature on the engine Under high temperature conditions, cooling system cooling efficiency is reduced, the engine hood temperature is high, the air density is reduced, resulting in a decline in the engine's air charge coefficient, engine power is reduced. Under high temperature conditions, due to the overheating of the engine, the thermal decomposition, oxidation and polymerization of the lubricating oil are aggravated. The higher the operating temperature of the engine, the faster the deterioration of the lubricating oil. The abnormally-burning exhaust gas enters the crankcase, increasing the oil base. The temperature of the shell contaminates the lubricating oil, which reduces the viscosity of the lubricating oil and deteriorates the oiliness, resulting in increased deterioration of the lubrication of the machine parts. Second, technical measures Strengthen the maintenance of the cooling system, remove scale, and maintain a good cooling effect of the cooling system. Do not make the engine overheating during driving, scale has a great influence on the cooling system's heat dissipation intensity. Tests show that the thermal conductivity of scale is several times smaller than that of cast iron and 100-300 times smaller than that of aluminum. Strengthen cooling system scale removal to improve heat dissipation Has an important role. Pay attention to inspection of the oil level in technical maintenance, and shorten the oil change period properly. In areas with large dust, the maintenance of air cleaners should be strengthened. Where conditions permit, oil radiators and high-quality engine oils should be installed. In addition to the above factors, the driver’s skill level also has an important impact on fuel consumption. Correctly driving the operation method can greatly reduce the fuel consumption. Tests have proved that drivers of different technical levels can drive the same car under the same conditions, and the difference in fuel consumption can reach 20-40%. To sum up, to maintain the economical efficiency of engine fuel consumption, we usually pay more attention to maintenance. We must know that the time and money spent on maintenance is much less than the time and money spent on maintenance. HTS1800 Sintering Furnace has function of power-off memory, it can restart with arbitrary curve of any program. HTS 1800 adopt world-class quality hearth material, new toroidal type transformer, silicon molybdenum rod, PID intelligent temperature control and high performance motor and belt, all those excellent components endow HTS1800 with great stability and longer lifespan. Sintering Furnace Vacuum Sintering,Zirconia Sintering,Zirconia Sintering Furnace,Vacuum Sintering Furnace Shandong Carved Intelligent Technology Group Co.,Ltd , https://www.demetdent.com