The wheat combine harvester is a high-grade implement in agricultural machinery. Its complex structure, correct operation and maintenance, can increase its use efficiency and reliability. When harvesting wheat, some combine harvesters were forced to stop repair due to unexpected failures, which caused the harvester to lose its best working time and brought huge economic losses to the operators. Therefore, the following matters should be taken into account when operating the wheat combine harvester: First, before the operation, the combine harvester shall be inspected and maintained in full accordance with the instructions for use. If any parts are damaged, they should be promptly replaced. Adjust the gaps between the parts and whether the friction surfaces of the lubrication parts are filled with lubricating oil. Check whether the protective cover (cover) of the harvester drive chain and transmission belt is complete, firm and reliable. The second is to start the engine without load, and the low speed combined with the clutch will reduce the header to normal cutting height and increase the throttle engine to reach Harvested at the rated speed when entering the area. Thirdly, the driver should concentrate on the operation, carefully observe the conveying condition of the combine harvester, listen to the sound of threshing, separating, cleaning and other components. After the harvester runs for 50 to 100 meters, it is stopped to check the operation quality, and necessary adjustments are made when necessary. Until the quality of work meets the requirements, it is put into normal work. Fourth, it is forbidden to clear the headers, conveyor belts, and walking systems during operations; it is forbidden to push objects on the conveyor belt with hands or feet; when maintenance, repair, and troubleshooting of the harvester are performed, the power must be cut off or after the engine is turned off. When cutters and rollers are jammed or fail at the same time, it is forbidden to clean or remove them at the same time, and it is forbidden to turn the rollers when clearing the cutters. It is forbidden to start the engine or engage the power gear when troubleshooting, and it is forbidden to directly put the hand into the food outlet or the grass discharge outlet to eliminate the jam when the machine is shut down, so as to avoid danger. Fifth, when carrying out maintenance or overhaul of the machinery under the header, the header must be raised and secured with a safety bracket or pad. Before long-distance land transfer or cross-district operations, the grain in the granary must be unloaded and the header should be lifted to the highest position and locked. It is forbidden to use open flames at night for harvesting, maintenance, refuelling or troubleshooting.
Our Honde brand offers outstanding value and performance for your farming equipment needs. We specialize in the design and manufacture of Pig Feeding Systems in a variety of shapes and styles, but the main product is the feeding pan. Our Pig Feeding Systems are all made of high quality stainless steel. The Pig Feeding Systems can be used for piglets or pigs. Pig Feeding Systems can not consume too much food due to its depth and depth. Pig Feeding Systems products can hold water or wet food, and will not rust, is conducive to the health of pigs. All Pig Feeding Systems products have rounded and smooth pan edges to prevent pigs from being harmed during use. Our Pig Feeding Systems make farming easier and easier to operate, and pigs will enjoy our pig feeding systems.
Pig Feeding Systems Pig Feeding Systems,Pig Equipment Automatic Feeding System,Pig Feeding Pan,Auto Feeding System For Pigs HuangHua FengYi Honde Metal Factory , https://www.farrowingcratesfromchina.com
