Kinesiology tape
Jerry tape is specialized in Anti Slip Tape for 10 years. Our Kinesiology tape is very welcomed by most customers.
Powerful and durable tape - Effective skin preparation can last for several days as the latest technology. Our synthetic, moisture-absorbing and breathable fabrics provide maximum waterproof, sweat-proof and moisture-proof properties. Pre-tangential roundness of motion tape helps to avoid wear and tear.
2. Features of Jerry tape Kinesiology Tape
1).100% high quality cotton stretch fabric
6)Single shrink package or OEM package
3. Applications of jerry tape Kunesiology Tape
1).Protective muscle
Kinesiology,Tape,Colorful,Cotton,Sport Tape,athletic,safety premium Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytape.com
main feature:
1. The fuselage adopts split packaging, which is convenient for users to enter the elevator and the split-type purification workshop. When merging, the screw is used to fix the cylindrical pin and the assembly is simple.
2. Worm gear reducer, overload protection of the main engine, lower noise and stable operation.
3. The stroke can be adjusted, and the size of the plate can be changed at will, which is suitable for products with various specifications.
4. Online detection and rejection of defective products, the rejection rate is over 99.9% (optional).
5. It adopts dual-axis positioning and (spline) shaft transmission, and the work is stable and stable.
6. Adopt PLC programmable modular design, easy to operate and easy to maintain (optional).
So how do we operate such a good device, and what are the precautions when operating? The following small series will be combined with years of experience to share with everyone, let's take a look at it.
Operating procedure
1. Turn on the green indicator light, and set the upper and lower heat seals to the “ON†position. The worktable is first. The temperature controller controls the forming temperature. Generally, 90C 100 and 100C 预置 are preset. The second temperature is preset. The controller is heat-sealed, and the temperature presets 120C ̊-140C ̊ up and down, forming and heat-sealing the temperature controller to preset the temperature, as appropriate.
2, put down the pressure block on the feeding roller, the temperature of the forming heating plate is in place, and then open the main machine, the plastic PVC is first formed, the forming blister is in conformity with the hole position of the heat sealing mold, pay attention to the heat sealing mold seat and put down the heat sealing mold to press the aluminum foil , aluminum foil will drive to the punching. Observe whether the plastic (referred to as the machine surface has been formed PVC) travels left and right offset. If there is a bias, the pressure roller should be adjusted to adjust the starting direction.
3. If the aluminum foil is biased to the left or right, the adjustable roller seat can be adjusted. If the front and rear deviations are adjustable, the box moves.
4. After the heat seal is punched out, the feeder gate is opened moderately, so that the medicine (tablet capsule, sugar coating) enters the feeding room in an appropriate amount. If there is a small amount of missing grain, it can be manually filled. The first thing to pay attention to when filling the grain: roller pressure roller Rolling hands and hooks break the aluminum foil. In addition, the formed blister is passed to the side of the pressure roller. There is a lack of grain. Do not reluctantly replenish it. Fill the hole. If the drug is brought in, it will affect the synchronization more seriously. When the aluminum foil is sealed, it is light. On the sticky mold, it is necessary to collect the machine.
5, due to increased drug weight, aluminum foil tension and machine temperature gradually change procedures, may cause molding and heat sealing is not synchronized, leading or lagging, first check whether plastic PVC and aluminum foil have a negative separation, and then can be adjusted by fine adjustment mechanism on the machine. The fine adjustment mechanism adjusts the distance or the front and rear adjustment of the cabinet as the mold moves forward and backward. Therefore, it should be placed in the neutral position before starting, so that it can be moved forwards and backwards. It can also be adjusted by moving the front box. After correct movement, the section has to wait for more than ten editions to be correct, so when it is not finished, do not Adjusted to adjust. 6, the heat sealing quality of plastic aluminum foil (bonding even and firm) by temperature or pressure, the relief of the screen plate to see, if there is poor heat sealing, generally suitable temperature, generally suitable temperature, slightly lower pressure, adjust the temperature , the most adjusted screw pressure.
7. Punching the offset, cutting the layout offset, stopping the manual movement of the box, the mold shift can be adjusted.
8, in the daily operation knowledge, must understand the structural principle of the machine for the operation work, the roller of the cam drive ejector seat, the up and down stroke, the position of the upper cover template is fixed dead, the blister is in a bad state, pay attention to the lower forming die or heat seal To the top dead center, fasten the column nut, if it is not careful, it will be easy to malfunction, and the roller needle of the ejector pin will die and the method of elimination will be eliminated.
The following matters are noted:
1. Do not install. There is a rubber wheel under the base and it can be moved.
2. Full-time staff training and maintenance.
3. The ground wire should be connected to the specified location of the grounding sign.
4. The machine should be kept clean and tidy.
5. All parts must be refueled before the machine is produced (see the operating provisions).
6. When the machine is shipped from the factory, the gearbox strap is lubricated and must be refueled before production.
7. It is proposed to use an oil-free air compressor as much as possible.
8. The pressure of forming, heat sealing, indentation, etc. should not be too large, otherwise it will affect the service life. The forming of the indentation type pad should leave a floating space of about one millimeter.
The above is the entire contents of the operating procedures and precautions for the flat aluminum-plastic packaging machine that I shared today. I hope that everyone can help.
Best analgesic tape - the most advanced sports Kinesiology tape, made of non-latex 95% cotton 5% elastic man-made fiber, has longer service life than other brands. Perfect pain relief for muscles, tibial splints, knees and shoulders. Lightweight, waterproof, latex-free, comfortable, providing support and flexibility, including safe reflective printing and suitcases.
2).Medical environmental protection glue
3).Temperature range 0° to 60°.
4).Widly weclomed size 50mmx5m,or custom size
5).Skined,Black,Blue etc color,printed customed design
2).Supporting Tape for your muscle
3).Effective to releive - fatigue at leg or thigh etc
4).Knee Pain(Gonalgia), Low Back Pain(LBP) and Shoulder Pain(Omalgia)
5).Effective to prevent Angle Sprain
Operating procedure and precautions for flat aluminum-plastic packaging machine
The flat aluminum-plastic packaging machine has three functions of aluminum/plastic, aluminum/aluminum, aluminum/plastic/aluminum, etc. It is suitable for aluminum/plastic, aluminum/aluminum, aluminum/plastic of tablets, capsules and other shaped tablets. / Aluminum packaging.