The reason why the greenhouses produce fog is because they need irrigation in the vegetable greenhouses. In addition, the transpiration of crops and soil moisture, the greenhouse temperature and humidity are very high, and do not cover with plastic film. When the humidity in the vegetable greenhouse exceeds 80%, and the time before and after noon time is in the high-temperature drenched sunlight shed, the moisture in the shed evaporates to the inner surface of the greenhouse. When the moisture in the shed evaporates to the inner surface of the greenhouse, it cools and condenses into water droplets, resulting in a lot of fog. For the severe fog in the greenhouse, the following four points can be remedied: 1. Watering in vegetable greenhouses should strictly control the amount of watering. 2. When the weather is good, it should be ventilated and ventilated. At the time of ventilation, the temperature and humidity in the booth should be observed at any time to prevent the temperature from dropping and freezing the vegetables. 3. Can try to beat beans into bean juice, sprayed on the film, a medium-sized shed with a pound of beans, two sprayer water, sprayed to the inside of the greenhouse film; 4. Increase the amount of light transmitted through the vegetable greenhouses to eliminate fog in the greenhouse. Prevent vegetable greenhouse fogs in advance when planting: 1. Change the traditional cultivation mode, use ridge cultivation instead, and the mulching method will produce little fog; 2. Can use anti-drop anti-fog film. It has obvious non-dripping effect and anti-fog function, and can reduce the air humidity in the shed. It also has the characteristics of high light transmittance and rapid temperature rise, which can catch crops to increase production and early maturing. It can also significantly reduce crop pests, reduce the amount of pesticides, and reduce pesticide contamination of crops. The purpose of the sterilization box is to store the equipment in the process of packaging, sterilization, transfer, storage and so on. These orthopeadic instruments working mode is suitable for high pressure steam sterilization, not suitable for dry heat sterilization, ethylene oxide sterilization, ultraviolet sterilization, microwave sterilization and formaldehyde sterilization. The sterilization instrument box is divided into two parts,the cover and the body. The central area of the box cover is the filter system of the disinfection box, which is composed of quick filter system clasps and filter paper. The clasps need to be fixed by double keys, and the fixed sound can be heard during operation, which can effectively avoid the accidental loss of filter paper. Filter paper can be reused for 1 000 times, has chemical resistance, its chemical properties will not change with time, and its hardness exceeds steel. There is also a safety fit for the filtration system around the box cover, namely a silicone washer and a tension retaining ring. On both sides of the box there are handles, locks and sockets for indicating signs. Sterilization Container,Sterile Containers,Medical Sterile Container,Sterile Basket Jiangsu Aomed Ortho Medical Technology Co.,Ltd , https://www.aomedortho.com