Cleaning brush roll machine works: Reverse rolling motor driven by a relatively direct contact with the product produced Rub peeled reached, the cleaning effect; high-pressure spray nozzle designed for automatic peeling edge side rinsing, the product can be achieved The effect of cleaning and peeling; the hardness of the brush bar can be changed according to the product variety, and the hard brush roller can be used to achieve the peeling effect of the roots and vegetables, and the soft brush roller can be used. Achieve the role of polishing the wax on fruits and vegetables. It should also be noted that the work must be started after the start of operation, which can extend the life of the motor and reduce the probability of motor damage. What is the principle of fruit and vegetable peeling cleaning machine running peeling? Meikang roller cleaning machine is easy to operate and has a large production capacity. It is one of the indispensable equipment for deep processing of fruits and vegetables. The hair quality of the hair roller is divided into bristles and soft hairs (different thickness). Customized according to customers' products, such as potatoes, sweet potatoes, carrots, etc., which are generally soft with fur; such as taro, chestnut, peanut, seafood, è—•Wait for the surface to be rough and thick with hard hair. To maintain the roller cleaning machine, always turn off the power switch to stop the device. 1. Chain adjustment: The chain is pressed by the fingers (middle finger and index finger) in the middle of the two sprockets, and the compression amount is 4-9 mm as the standard value. When the standard value is exceeded, the idler is adjusted to the specified tightness. This detection kit applies immunoassay to directly detect the presence of virus and is possible to reach large-scale testing of up to millions of tests one day COVID-19 Antigen Test NINGBO AUTRENDS INTERNATIONAL TRADE CO., LTD , https://www.metests.com
2. Checking and refueling of the gearless gearbox oil: It is forbidden to remove the oil plug when the fireworks are exhausted. The oil just flows out to the appropriate amount. If it is insufficient, it should be replenished.
3. Belt adjustment: In the middle of the two pulleys, the compression of the belt (middle finger and index finger) is 7~12mm as the standard value. When the value is greater than the standard value, adjust the idler to the specified tightness.
After understanding the maintenance points of the roller cleaning machine, let us look at the main points when the roller cleaning machine is idle:
1. Each rotating part of the roller cleaning machine and the friction active part are fully filled with oil to prevent rust.
2. Each chain is fully filled with oil to prevent rust.
3. The debris and vegetable leaves enclosed by the rotating parts, belts, chains, etc. should be completely removed.
4. The parts are attached to dirt, sundries, etc., rinse with water, dry with a dry cloth, and keep the equipment clean.