Pathological Diagnostic Solutions LBC, AI-assisted Diagnosis, Pathology Slide Scanner HANGZHOU DIAN BIOTECHNOLOGY CO., LTD. , https://www.dianbiotech.com
The three-dimensional mixer can mix a variety of materials into a homogeneous mixture, such as mixing cement, sand, gravel and water into concrete wet materials; it can also increase the contact surface area of ​​the material to promote chemical reactions; it can also accelerate physical changes, such as The granular solute is added to the solvent, and the dissolution and mixing can be accelerated by the action of the mixing machine.
The three-dimensional mixer consists of a base, a transmission system, an electrical control system, and a multi-directional transport mechanism. Characteristics Due to the multi-directional movement of the mixing barrel, the material in the barrel has more cross-mixing points, and the mixing effect is high. The uniformity can reach 99.9% or more, and the large loading coefficient can reach 0.9 (0.4-0.6 for ordinary mixer). The mixing time is short and the efficiency is high. The three-dimensional mixer has a unique design of the mixing barrel body, and the inner wall of the barrel is finely polished, has no dead angle, no contaminant material, convenient discharging, easy to clean and simple operation.
In the operation of the three-dimensional mixer, the mixing barrel has a diversified direction, which makes the various materials in the mixing process accelerate the flow and diffusion effects, while avoiding the centrifugal force generated by the general mixing, the segregation and accumulation of the material specific gravity. With or without dead ends, it can effectively ensure the good quality of the material of the mixture.
The mixing of the liquid of the three-dimensional mixer mainly relies on a mechanical agitator, a gas stream and a jet of the liquid to be mixed, etc., so that the material to be mixed is agitated to achieve uniform mixing. The agitation causes a portion of the liquid to flow, which in turn pushes the liquid around it, with the result that a circulating liquid flow is formed within the solution, and the resulting diffusion between the liquids is referred to as bulk convection diffusion.
The three-dimensional mixer is divided into four categories: gas and low viscosity liquid mixer, medium and high viscosity liquid and paste mixing machine, thermoplastic material mixer, powder and granular solid material mixing machine.
In the operation of the three-dimensional motion mixer, the mixing barrel has a multi-directional operation, which accelerates the flow and diffusion during the mixing process.
The three-dimensional motion mixer is a machine that uniformly mixes two or more materials by mechanical force, gravity, and the like. Three-dimensional mixers are widely used in various industries and daily life.
During the operation of the three-dimensional mixer, the mixing barrel has multi-directional operation, which accelerates the flow and diffusion during the mixing process, and avoids the segregation and accumulation of the specific gravity of the material caused by the centrifugal force of the general mixer. Phenomenon, mixing without dead ends, can effectively ensure the quality of the mixture.
The 3D mixer working environment setting requires all the participating blends to be evenly distributed when mixing. The degree of mixing is divided into three states: ideal mixing, random mixing, and completely incompatible. The various materials are mixed in the mixer, depending on the material mix, physical condition and characteristics, and the mixing machine and mixing operation time period. The liquid mixture is mainly composed of a mechanical agitator, a gas stream mixed with a liquid jet, the mixed material is mixed and stirred uniformly, the agitation causes a partially flowing liquid, the liquid flows and the surrounding liquid, and the resulting liquid flows in a container, and the resulting liquid The diffusion between them is called the convection and diffusion of the subject. The fluid flow rate with agitation is high, and the high-speed fluid flow and low liquid flow shear at the interface appearance, resulting in a large amount of local eddy currents. These vortices quickly spread to the surroundings, and more liquid enters the vortex, and turbulent convective diffusion formed in a small range is called eddy diffusion.
The difference between the mixed liquid and the solid material of the three-dimensional mixer
A three-dimensional mixer is a machine that uniformly mixes two or more materials by mechanical force, gravity, or the like. Hybrid machines are widely used in various industries and daily life.